ombran SC for hand lay-up lamination
17 Nov 2020
With ombran SC, MC-Bauchemie has developed a new, odourless and styrene-free reactive resin for use in the hand lay-up lamination of sewerage structures. It constitutes the main component of a complete system which additionally comprises the carrier material ombran L 450 and the catalyst ombran SC Cat L.
ombran SC is a new odourless and styrene-free reactie resin for use in the hand lay-up lamination of sewerage structures. MC-Bauchemie 2026
Hand lay-up laminates are particularly suitable for the lining of complex construction geometries. With ombran SC, MC-Bauchemie has launched a reactive resin covering a wide range of applications in the wastewater sector: From the connection of CIPP liners and the coating of channels and berms in manhole shafts to the provision of BSAC-resistant membranes and the addition of GRP elements and panels.
The complete rehabilitation solution
In addition to the organic-mineral resin ombran SC, the integrated system includes the carrier material ombran L 450 consisting of an ECR glass fibre mat (powder-bound, random-layed chopped fibres) with a basis weight of 450 g/m². As an integral part of the system, the catalyst ombran SC Cat L enables flexible control of the curing rate of the laminate system.
Fast application without odour nuisance
The low-viscosity, two-component organic-mineral resin is easy to apply and can be reworked quickly to allow continuous progress. It cures quickly even at low temperatures and without the need for any additional heating. At just 10 °C material and ambient temperature, the laminate applied with a 3-layer lay-up structure under controlled addition of the catalyst ombran SC Cat L is water-resistant after just approx. 45 minutes. Since – unlike the laminating resins commonly used to date – it is odourless and styrene-free, there is no odour nuisance during the lamination process, thus protecting not just the applicator but also local residents from unpleasant odours.
High chemical and mechanical resistance
ombran SC adheres to glass- and synthetic-fibre CIPP liners and short liners as well as to dry and matt-damp substrates such as mortar, concrete, brick and ceramics, to provide high chemical and mechanical resistance. As the product is water-vapour-diffusible, it does not show any osmotic blistering in the event of possible rearward moisture penetration of the structure. Because the reaction times of the organic-mineral resin can be specifically controlled and adjusted with the aid of the catalyst ombran SC Cat L, contractors can be confident of safely applying a durable hand lay-up laminate, even under the challenging conditions encountered in sewers.
Related Products
RELATED CONTENT
3rd ombran Conference in Bottrop
On 23 and 24 January 2020, the ombran division of MC-Bauchemie held the third ombran Conference at MC-Bauchemie's training centre in Bottrop. More than 60 operators of drainage and…
New special reaction resin for liner-attachment
Developed as a special-purpose two-component reaction resin, Konudur Flexfit is characterised by its easy workability, its high moisture compatibility during application, and its very…
ombran MHP-SP 3000 defies the toughest conditions
With ombran MHP-SP 3000, MC-Bauchemie has introduced into the market a new generation of mineral coatings for concrete and masonry manholes and sewers. Offering exceptionally high chemical…
More
Germany
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Czech Republik
Denmark
Finland
France
Georgia
Great Britain
Hungary
Ireland
Latvia
Lithuania
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Spain
Sweden
Switzerland
Ukraine
Ethiopia
Ghana
Egypt
Guinea
Israel
India
Kazakhstan
Malaysia
Singapore
United Arab Emirates
Vietnam
Taiwan
Philippines
New Zealand
Australia
Canada
Brazil
Paraguay
Uruguay
Bolivia
Chile
Peru