Properties
- Ready to use 2-component epoxy-based anchor adhesive
- Suitable for dry and wet non-cracked concrete
- Applicable with threaded rods and rebars
- Rapid strength development for early initial loading
- High compressive and tensile strength
- Thixotropic and stable for vertical and overhead application
- Very low application temperature
- REACH exposure: water contact permanent, inhalation periodic, processing and application
- Environmental Product Declaration EPD
Applications
- Anchoring work for static and quasi-steady loads in horizontal, vertical and overhead areas
- Approved system for use in uncracked concrete from C20/25 to C50/60
- Anchoring for dry and permanent wet interior and exterior components, with and without especially aggressive conditions
- Anchoring of threaded rods and rebars for fixings of attachements e.g. consoles, railings, storage racks, awnings, scaffolding, suspended ceiling, building technology, etc.
- Approved as bonded anchor according to European Technical Assessment (ETA-15/0506)
- Manual application with the MC-Fastpack Power-Tool
Germany
Austria
Belarus
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Czech Republik
Denmark
Finland
France
Georgia
Great Britain
Hungary
Ireland
Latvia
Lithuania
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Spain
Sweden
Switzerland
Ukraine
Ethiopia
Ghana
Egypt
Guinea
Israel
India
Kazakhstan
Malaysia
Singapore
United Arab Emirates
Vietnam
Taiwan
Philippines
New Zealand
Australia
Canada
Brazil
Paraguay
Uruguay
Bolivia
Chile
Peru